FLOATS AND HOSE SAFETY RULES BEFORE USE

∼∼∼∼

We ask each of our customers to read the Safety rules before any purchase.

The recommended age for FLOATS AND HOSE floats are Ages 14 & up.

FLOATS AND HOSE FLOATS ARE NOT A LIFE SAVING DEVICE. DO NOT LEAVE CHILDREN UNATTENDED WHILE IN USE.

Before use of a FLOATS AND HOSE float on a beach, always observe the local regulations and safety beach rules.

FLOATS AND HOSE floats are not designed to be towed or dragged behind any watercraft.

 

INFLATION AND SET UP

 

STEP 1: unfold and lay your foot on a flat surface, clear of any sharp objects that could possibly puncture of damage your float.

STEP 2: Fully open all air chambers.

STEP 3: Using an inflation device, inflate each chamber until folds in the float are close to none.

STEP 4: close all chambers and enjoy.

 

DUAL ACTION VALVE USE

 

STEP 1: Ensure all dual action valves are open and pulled out of the float body.

STEP 2: Insert black mid-valve into the clear valve base until the black mid valve is fully inserted.

STEP 3: Insert any standard inflation device into the black mid valve, hold firmly and inflate with your inflation device.

( PRO TIP) If you do not have an inflation device, Insert a hair dryer (cold air only) directly into the clear valve base to inflate.

STEP 4: Fully close all air chambers and ensure the air valves are depressed into the float body.

 

STANDARD LARGE VALVE

 

STEP 1: Simply pinch the base of the valve while inflating, secure the top plug into the valve opening when float is inflated.

STEP 2: Fully close all air chambers and ensure the air valves are depressed into the float body.

 

DEFLATION

 

DUAL ACTION VALVE : Simply pull the entire valve out of the float body and air will start to escape.

 

STANDARD LARGE VALVE : Pull out the top plug and pinch the base of the valve while applying light pressure to the float to cause air to escape.

 

 

IMPORTANT

 

Inflate your FLOATS AND HOSE float slowly until most of the wrinkles in the material are gone. Please note there will still be wrinkles on the float when fully inflated. Do not over-inflate to attempt to remove the wrinkles. When inflated, the air chambers feel firm to touch.

 

We recommend that you use a foot pump or electric air mattress pump to inflate your float. Do not use air compressors to inflate. Be aware as over-inflation can rupture the product beyond repair.

 

Changes in air temperature will cause air to expand or contract. This can cause damage to your float. Please use caution before leaving your float in direct sunlight as the heat will cause the air to expand. You may need to release air from your float if your float is hot.

 

If you leave the float out in colder temperatures or out in cold water you may need to add air to your float as it is possible it may deflate over time due to air contracting.

 

All of our pool floats could hold approximately 200lbs of weight.

 

MAINTENANCE

Your float longevity is dependant on how you treat your float. Proper maintenance could make your float last longer than usual. After each use, remove from water, rinse with fresh water and pat down with towel until fully dry. Deflate until flat, fold and store in the original FLOATS AND HOSE box until next use.

Store your deflated FLOATS AND HOSE float in a cool, dry place with no UV exposure to protect against sun damage.

 

FLOAT ISSUES & REPAIR

All of our floats are made with extra thick material to ensure best quality. If your float is punctured or has a hole, we recommend patching the hole with the PVC patches that are included in all FLOATS AND HOSE boxes.

STEP 1: Deflate float fully, clean the area around the the puncture and make sure the area is fully dry.

STEP 2: Peel the clear repair patch and apply directly over the puncture.

STEP 3: Press firmly for 30 seconds and set aside for 1 hour before next use in order for patch to be secure.